Citakan:Kotakinfo Konektor
| D4 Video connector | ||||
|---|---|---|---|---|
| ||||
| Tipe | Analogue video connector | |||
| Sajarah produksi | ||||
| Disainer | Some guy | |||
| Didisain | Early 1990s | |||
| Pabrik | Initially Toshiba | |||
| Diproduksi | Early 1990s to 2005 | |||
| Diganti | RF connector | |||
| Diganti ku | DVI connector (2005) | |||
| Spésifikasi | ||||
| Panjang | 36 mm (typical) | |||
| Lébar | 25 mm | |||
| Luhur | 6.5 mm | |||
| Kamampuan hot plug | Yes | |||
| Éksternal | External | |||
| Listrik | 220 volts AC 50 Hz typically | |||
| Bumi | Dedicate pin | |||
| Tegangan maks | 450 volts peak | |||
| Arus maks | 20 amps at 220 volts, 5 amps at 400 volts | |||
| Sinyal audio | None | |||
| Sinyal video | Analogue 480i, 480p, 720p, 1080i | |||
| Sinyal data | Resolution and Aspect ratio only | |||
| Rubak | 2 bits | |||
| Rubak pita | 120 bps | |||
| Pakakas maks | 1 | |||
| Protokol | Serial | |||
| Kabel | 14 core sheilded (25 m max) | |||
| Suku | 14 (6 video, 3 reserved, 2 detect, 3 data) | |||
| Konéktor | DB-25 | |||
| Pin kaluar | ||||
 A male connector seen from the front. | ||||
| Spec name | Example col title | |||
| Pin 1 | Y | luminance (0.7 V, 75 ohms) | ||
| Pin 2 | Y GND | Y ground | ||
| Pin 3 | Pb | 0.35 V, 75 ohms | ||
| Pin 4 | Pb GND | |||
| Pin 5 | Pr | 0.35 V, 75 ohms | ||
| Pin 6 | Pr GND | |||
| Pin 7 | Reserve link 1 | |||
| Pin 8 | Data line 1 | 0V = 525 lines 2.2V = 750 lines 5V = 1125 lines | ||
| Pin 9 | Data line 2 | 0V = 59.94i / 60i 5V = 59.94p / 60p | ||
| Pin 10 | Reserve link 2 | |||
| Pin 11 | Data line 3 | 0V = 4:3 2.2V = 4:3 letterbox 5V = 16:9 | ||
| Pin 12 | Plug insert detect ground | |||
| Pin 13 | Reserve link 3 | |||
| Pin 14 | Plug insert detect | output 10 k ohms, input > 100k ohms | ||
| Hooks | GND | Shell ground | ||
| These are some notes about the pinout of this connector. The pins are razor sharp. | ||||
Connector Infobox is an infobox for electrical and (audio/video) signal connectors of all kinds.
Notes
éditThe template supports 3 images:
- image, logo, pinout_image
Image and logo share a 300px wide area - so if both are used then the width of the image should be set to 150px i.e. [[Image:example.jpg|150px]]. If only image and pinout are used, then the size of both should be 300px.
- To edit this example see Template:Infobox Connector/example
Parameters and usage
édit{{Kotakinfo konektor
|name=
|type=
|image=
|logo=
|caption=
|designer=
|design_date=
|manufacturer=
|production_date=
|superseded=
|superseded_by=
|superseded_by_date=
|external=
|hotplug=
|length=
|width=
|height=
|electrical=
|ground=
|maximum_voltage=
|maximum_current=
|audio_signal=
|video_signal=
|data_signal=
|data_bit_width=
|data_bandwidth=
|data_devices=
|data_style=
|cable=
|physical_connector=
|num_pins=
|pinout_col1_name=
|pinout_col2_name=
|pinout_image=
|pinout_caption=
|pin1=
|pin1_name=
|pin2=
|pin2_name=
|pin3=
|pin3_name=
|pin4=
|pin4_name=
|pin5=
|pin5_name=
|pin6=
|pin6_name=
|pin7=
|pin7_name=
|pin8=
|pin8_name=
|pin9=
|pin9_name=
|pin10=
|pin10_name=
|pin11=
|pin11_name=
|pin12=
|pin12_name=
|pin13=
|pin13_name=
|pin14=
|pin14_name=
|pin15=
|pin15_name=
|pin16=
|pin16_name=
|pin17=
|pin17_name=
|pin18=
|pin18_name=
|pin19=
|pin19_name=
|pin20=
|pin20_name=
|pin21=
|pin21_name=
|pin22=
|pin22_name=
|pin23=
|pin23_name=
|pin24=
|pin24_name=
|pin25=
|pin25_name=
|pin26=
|pin26_name=
|pin27=
|pin27_name=
|pin28=
|pin28_name=
|pin29=
|pin29_name=
|pin30=
|pin30_name=
|pin31=
|pin31_name=
|pin_custom1_name=
|pin_name_custom1=
|pin_custom1=
|pin_custom2_name=
|pin_name_custom2=
|pin_custom2=
|pin_custom3_name=
|pin_name_custom3=
|pin_custom3=
|pin_custom4_name=
|pin_name_custom4=
|pin_custom4=
|pin_custom5_name=
|pin_name_custom5=
|pin_custom5=
|pin_custom6_name=
|pin_name_custom6=
|pin_custom6=
|pin_custom7_name=
|pin_name_custom7=
|pin_custom7=
|pin_custom8_name=
|pin_name_custom8=
|pin_custom8=
|pinout_notes=
}}