Magnétostatika

Magnetostatika nyaéta pangajaran ngeunaan medan magnet statik. Lamun dina elektrostatika mah muatan anu cicing henteu obah (stasioner) téh mangka dina magnetostatika mah arus listrik anu stasioner teh.

Éléktromagnétisme
Listrik · Magnétisme
Éléktrostatika Muatan listrik Hukum Coulomb Médan listrik Hukum Gauss Poténsial listrik Momén dipol listrik
Magnétostatika Hukum Ampère pikeun rangkéan Médan magnétik Fluks magnétik Hukum Biot-Savart Momén dipol magnétik
Éléktrodinamika Arus listrik Hukum gaya Lorentz Gaya gerak listrik Induksi éléktromagnétik Hukum induksi Faraday Arus displacement Rumus-rumus Maxwell Médan éléktromagnétik Radiasi éléktromagnétik
Jaringan listrik Konduksi Résistansi Kapasitansi Induktansi Impedansi Rohang résonansi Waveguides
Ténsor dina Rélativitas Ténsor éléktromagnétik tekanan-énergi éléktromagnétik

Panerapan

Magnet statik ngarupakeun kasus husus tina rumus Maxwell

Dimimitian tina rumus Maxwell, bisa dilakukeun panyaderhanaan saperti kieu:

• listrik statis ulah diperhitungkeun
• medan listrik ulah diperhitungkeun
• anggap medan magnet konstan ti waktu ka waktu

Ngaran	Wangun Diferensial parsial	wangun Integral
anggapan	${\vec {D}}=0$	${\vec {D}}=0$
Hukum Gauss pikeun magnetisme:	${\vec {\nabla }}\cdot {\vec {B}}=0$	$\oint _{A}{\vec {B}}\cdot \mathrm {d} {\vec {A}}=0$
anggapan	${\vec {E}}=0$	${\vec {E}}=0$
Hukum Ampére:	${\vec {\nabla }}\times {\vec {H}}={\vec {J}}$	$\oint _{S}{\vec {H}}\cdot \mathrm {d} {\vec {l}}=I_{\mathrm {enc} }$

Artikel ieu keur dikeureuyeuh, ditarjamahkeun tina basa Inggris. Bantuanna didagoan pikeun narjamahkeun.

The quality of this approximation may be guessed by comparing the above equations with the full version of Maxwell's equations and considering the importance of the terms that have been removed. Of particular significance is the comparison of the ${\vec {J}}$ term against the ${\frac {\partial {\vec {D}}}{\partial t}}$ term. If the ${\vec {J}}$ term is substantially larger, then the smaller term may be ignored without significant loss of accuracy.

Re-introducing Faraday's law

A common technique is to solve a series of magnetostatic problems at incremental time steps and then use these solutions to approximate the term ${\frac {\partial {\vec {B}}}{\partial t}}$. Plugging this result into Faraday's Law finds a value for ${\vec {E}}$ (which had previously been ignored). This method is not a true solution of Maxwell's equations but can provide a good approximation for slowly changing fields.

Solving magnetostatic problems

If all currents in a system are known (i.e. if a complete description of ${\vec {J}}$ is available) then the magnetic field can be determined from the currents by the Biot-Savart equation:

${\vec {B}}={\frac {\mu _{0}}{4\pi }}\int {\frac {\mathrm {d} {\vec {I}}\times {\hat {r}}}{r^{2}}}$

This technique works well for problems where the medium is a vacuum or air or some similar material with a relative permeability of 1. This includes Air core inductors and Air core transformers. One advantage of this technique is that a complex coil géometry can be integrated in sections, or for a very difficult géometry numerical integration may be used. Since this equation is primarily used to solve linear problems, the complete answer will be a sum of the integral of éach component section.

One pitfall in the use of the Biot-Savart equation is that it does not implicitly enforce Gauss's law for magnetism so it is possible to come up with an answer that includes magnetic monopoles. This will occur if some section of the current path has not been included in the integral (implying that electrons are being continuously créated in one place and destroyed in another).

Using Biot-Savart in the presence of Ferromagnetic, Ferrimagnetic or Paramagnetic materials is difficult because the external current induces a surface current in the magnetic material which in turn must be included in the integral. The value of the surface current depends on the magnetic field which was what you were trying to calculate in the first place. For these problems, using Ampére's law (usually in integral form) is a better choice. For problems where the dominant magnetic material is a highly perméable magnetic core with relatively small air gaps, a magnetic circuit approach is useful. When the air gaps are large in comparison to the magnetic circuit length, fringing becomes significant and usually requires a finite element calculation. The finite element calculation uses a modified form of the magnetostatic equations above in order to calculate magnetic potential. The value of ${\vec {B}}$ can be found from the magnetic potential.